sharp and full thread Tightly twisted, not easy to fall off
Compatible with both hard and soft cables.
Voltage (VOLTAGE RATING): 250V
Heat resistant, non-flammable
CURRENT RATING: 24A
Insulation resistance: ≥1000MΩ
Plastic parts: PA66
Shrapnel teeth: Stainless steel 301
Temperature (Temperature range): -40°C to 105°C

Suggestions

Make sure that the wires are twisted firmly into the wire nuts and not loosened.
Wiring should be installed and routed by an electrician.
Check the cable and connector to ensure it is connected tightly.
Should be used by electrical technician.
Warning

Do not use damaged walnuts.
Do not use with wire size and current beyond the rated power.
The electrical system must be cut off before installation or maintenance every time.
Do not trap, convert or misuse.
Do not store in a damp place.
Don’t use with the bigger wire and over current on the specification.
Don’t use the damaged connector.
Cut off the electrical system before install or fix the connector.
Don’t store it in the wet or moisture condition
Don’t modify