GENERAL DESCRIPTION

• For use on liquid lines such as water, ethylene glycol, or

any non-corrosive fluid in chillers, pumps, condensers, boilers, etc. • With S.P.D.T. contact mechanism. • Paddle consists of three segments that can be removed

or trimmed for use in 1 to 6″ pipe. • Drip proof models: Available upon request.

OPERATION ADJUSTMENT RANGE TABLE

• When the operating value is not specified, the flow switch is shipped with the operating value set around the minimum flow rate. • When you turn the flow adjusting screw clockwise, the operating point goes up. When you turn it counterclockwise, the operating point goes down. •When more than two paddles is attached, you can change the flow rate adjustment range by removing the paddles one by one in order of the longer paddle first.